VAN FORD ECONOLINE 2003 VAN
Security
Battery YEL (+) IGNITION SWITCH HARNESS
Ignition RED/LT GRN (+) IGNITION SWITCH HARNESS
Starter01 WHT/PNK (+) IGNITION SWITCH HARNESS
AllDoorTrigger BLK/BLU (-) DR. KICK PANEL
ParkingLights BRN (+) AT HEADLIGHT SWITCH
Remote Start
Battery YEL (+) IGNITION SWITCH HARNESS
Ignition RED/LT GRN (+) IGNITION SWITCH HARNESS
Ignition02 BLACK/LIGHT GREEN (+) IGNITION SWITCH HARNESS
Accessory01 GRAY/YELLOW (+) IGNITION SWITCH HARNESS
Starter01 WHT/PNK (+) IGNITION SWITCH HARNESS
KeySense BLACK/PINK (-) IGNITION SWITCH HARNESS
Tach WHITE/PINK (-) AT MODULE ON REAR TOP OF ENGINE
SpeedSense GRAY/BLACK (AC) IN HARNESS ON DRIVERS SIDE OF ENGINE COMPARTMENT
ParkingLights BRN (+) AT HEADLIGHT SWITCH
BrakeLights LT GRN (+) AT SWITCH ABOVE BRAKE PEDAL
ReverseLights BLACK/PINK (+) IN HARNESS AT LIGHT
Horn DRK. BLU (-) AT STEERING COLUMN HARNESS
Doorlocks / Window
PowerUnLock BROWN REV DR. KICK PANEL
PowerLock RED REV DR. KICK PANEL
DriverDoorMotor01 PNK/BLK REV DR. KICK PANEL
DriverDoorMotor02 RED/ORG REV DR. KICK PANEL
PassengerDoorMotor01 PNK/ORG REV DR. KICK PANEL
LeftFrontWindow01 WHT/BLK REV DR. DOOR SWITCH
LeftFrontWindow02 YEL REV DR. DOOR SWITCH
RightFrontWindow01 TAN/BLK REV DR. DOOR SWITCH
RightFrontWindow02 WHT/YEL REV DR. DOOR SWITCH
Convenience
HeadLights RED/YEL (+) AT PARKING LIGHT SWITCH
Mobile Audio / Video
Battery YEL (+) IGNITION SWITCH HARNESS
Accessory01 GRAY/YELLOW (+) IGNITION SWITCH HARNESS
Ground BLACK/LIGHT GREEN (-) RADIO HARNESS
Illumination LIGHT BLUE/RED (+) RADIO HARNESS
FrontLeftSpeakerPos ORANGE/LIGHT GREEN
FrontLeftSpeakerNeg LIGHT BLUE/WHITE
FrontRightSpeakerPos WHITE/LIGHT GREEN
FrontRightSpeakerNeg DARK GREEN/ORANGE
RearLeftSpeakerPos GRAY/LIGHT BLUE
RearLeftSpeakerNeg TAN/YELLOW
RearRightSpeakerPos ORANGE/RED
RearRightSpeakerNeg BROWN/PINK
Control Modules
Note:
Wirediagram.com makes no representation or warranty with respect to the above information including its accuracy, completeness, or its freedom from third parties' proprietary rights. Wirediagram.com disclaims all liability or responsibility for errors or omissions therein or any decision made by the recipient in reliance thereon. The installer must verify any circuitry with the proper test equipment prior to installation.
