2003 FORD F150 2DR PICKUP
Security
Battery GREEN/VIOLET (+) IGNITION SWITCH HARNESS
Ignition RED/BLACK (+) IGNITION SWITCH HARNESS
Starter01 RED/LIGHT BLUE (+) IGNITION SWITCH HARNESS
AllDoorTrigger VIOLET (-) DOOR SWITCH OR HEADLIGHT SWITCH
ParkingLights BROWN (+) AT VEHICLE LIGHT SWITCH
Remote Start
Battery GREEN/VIOLET (+) IGNITION SWITCH HARNESS
Ignition RED/BLACK (+) IGNITION SWITCH HARNESS
Ignition02 GRAY/YELLOW (+) IGNITION SWITCH HARNESS
Accessory01 GRAY/YELLOW (+) IGNITION SWITCH HARNESS
Starter01 RED/LIGHT BLUE (+) IGNITION SWITCH HARNESS
AntiTheftType SECURILOCK
AntiTheftSystem AN RF SIGNAL ACTIVATED SYSTEM
KeySense BLACK/PINK (-) IGNITION SWITCH HARNESS
NeutralSafety RED/LIGHT BLUE (+) IGNITION SWITCH HARNESS
Tach WHITE/PINK (-) AT IGNITION COIL
SpeedSense GRAY/BLACK (AC) IN HARNESS ON INTERIOR DRIVERS SIDE OF FIREWALL
ParkingLights BROWN (+) AT VEHICLE LIGHT SWITCH
BrakeLights RED (+) AT SWITCH ABOVE BRAKE PEDAL
ReverseLights BLACK/PINK (+) IN HARNESS TO TRANSMISSION
Doorlocks / Window
PowerUnLock PINK/GREEN (-) IN HARNESS IN DRIVERS KICKPANEL
PowerLock PINK/YELLOW (-) IN HARNESS IN DRIVERS KICKPANEL
DriverDoorMotor01 RED/ORANGE (+)
DriverDoorMotor02 PINK/BLACK (+) IN HARNESS IN DRIVERS KICKPANEL
Convenience
HeadLights RED/YELLOW (+) AT VEHICLE LIGHT SWITCH
Mobile Audio / Video
Battery GREEN/VIOLET (+) IGNITION SWITCH HARNESS
Accessory01 GRAY/YELLOW (+) IGNITION SWITCH HARNESS
Ground BLACK/GREEN (-) RADIO HARNESS
Illumination LIGHT BLUE/RED (+) RADIO HARNESS
FrontLeftSpeakerPos GRAY/LIGHT BLUE
FrontLeftSpeakerNeg TAN/YELLOW
FrontRightSpeakerPos WHITE/LIGHT GREEN
FrontRightSpeakerNeg DARK GREEN/ORANGE
RearLeftSpeakerPos ORANGE/LIGHT GREEN
RearLeftSpeakerNeg LIGHT BLUE/WHITE
RearRightSpeakerPos ORANGE/RED
RearRightSpeakerNeg BROWN/PINK
Control Modules
Note:
Wirediagram.com makes no representation or warranty with respect to the above information including its accuracy, completeness, or its freedom from third parties' proprietary rights. Wirediagram.com disclaims all liability or responsibility for errors or omissions therein or any decision made by the recipient in reliance thereon. The installer must verify any circuitry with the proper test equipment prior to installation.
