2003 ACURA RSX 2DR COUPE
Security
Battery WHITE (+) IGNITION SWITCH HARNESS
Ignition BLACK/YELLOW (+) IGNITION SWITCH HARNESS
Starter01 BLACK/WHITE (+) IGNITION SWITCH HARNESS
AllDoorTrigger WHITE (-) AT PIN SW BLACK(-) AT K/LESS UNDER DRV DAS
TrunkTrigger RED (-) AT MODULE TO LEFT OF STEERING COLUMN
HoodTrigger YELLOW/RED (-) IN HARNESS TO LEFT OF STEERING COLUMN
ParkingLights RED/BLACK (+) AT VEHICLE FUSE PANEL
Remote Start
Battery WHITE (+) IGNITION SWITCH HARNESS
Ignition BLACK/YELLOW (+) IGNITION SWITCH HARNESS
Ignition02 RED/BLACK (+) IGNITION SWITCH HARNESS
Accessory01 WHITE/RED (+) IGNITION SWITCH HARNESS
Starter01 BLACK/WHITE (+) IGNITION SWITCH HARNESS
AntiTheftType TRANSPONDER
AntiTheftSystem AN RF SIGNAL ACTIVATED SYSTEM
KeySense BLUE/WHITE (-) IGNITION SWITCH HARNESS
NeutralSafety GREEN/WHITE (-) AT GEAR SELECTOR SWITCH
Tach BLUE (-) AT PLUG BEHIND DRIVERS HEADLIGHT
SpeedSense WHITE/GREEN (AC) AT PCM BEHIND GLOVEBOX
ParkingLights RED/BLACK (+) AT VEHICLE FUSE PANEL
BrakeLights WHITE/BLACK (+) AT SWITCH ABOVE BRAKE PEDAL
ReverseLights GREEN/BLACK (+) IN HARNESS IN DRIVERS KICKPANEL
Doorlocks / Window
PowerUnLock BLACK/RED (-) IN HARNESS IN DRIVERS KICKPANEL
PowerLock BLACK/WHITE (-) IN HARNESS IN DRIVERS KICKPANEL
Convenience
HeadLights BLUE/RED (-) AT VEHICLE LIGHT SWITCH
Mobile Audio / Video
Battery WHITE (+) IGNITION SWITCH HARNESS
Accessory01 WHITE/RED (+) IGNITION SWITCH HARNESS
Ground BLACK (-) RADIO HARNESS
Illumination RED/BLACK (+) RADIO HARNESS
PowerAntenna BROWN (+) RADIO HARNESS
FrontLeftSpeakerPos BLUE/GREEN
FrontLeftSpeakerNeg GRAY/BLACK
FrontRightSpeakerPos RED/GREEN
FrontRightSpeakerNeg BROWN/BLACK
RearLeftSpeakerPos BLUE/YELLOW
RearLeftSpeakerNeg GRAY/WHITE
RearRightSpeakerPos RED/YELLOW
RearRightSpeakerNeg BROWN/WHITE
Control Modules
Note:
Wirediagram.com makes no representation or warranty with respect to the above information including its accuracy, completeness, or its freedom from third parties' proprietary rights. Wirediagram.com disclaims all liability or responsibility for errors or omissions therein or any decision made by the recipient in reliance thereon. The installer must verify any circuitry with the proper test equipment prior to installation.
