1996 MAZDA B-SERIES 2DR PICKUP
Security
Battery YEL + (+) IGNITION SWITCH HARNESS
Ignition GRN/VIO (+) IGNITION SWITCH HARNESS
Starter01 RED/LT.BLU(+) (+) IGNITION SWITCH HARNESS
AllDoorTrigger PNK/LT.GRN(-) (+) 16 PIN CONN PIN 9 DRIVERS KICK
TrunkTrigger N/A
HoodTrigger N/A
FactoryAlarmDisarm N/A
ParkingLights BRN (+) (+) IN HARNESS BY FIREWALL OR DRIV KICK
Remote Start
Battery YEL + (+) IGNITION SWITCH HARNESS
Ignition GRN/VIO (+) IGNITION SWITCH HARNESS
Ignition02 + IGNITION SWITCH HARNESS
Ignition03 +
Accessory01 GRY/YEL + (+) IGNITION SWITCH HARNESS
Accessory02 +
Starter01 RED/LT.BLU(+) (+) IGNITION SWITCH HARNESS
AntiTheftSystem NONE
KeySense BLK/PNK (-) (-) STEERING COLUMN HARNESS
NeutralSafety NOT GROUNDING OEM SWITCH OPENS STARTER CIRCUIT
Tach YEL/BLK (-) (-) AT COIL (TAN/ORG 2 CYLINDER 1997)
SpeedSense GRY/BLK 8000 (AC) PASS FIREWALL 104 PIN CONN POS 58 PCM
ParkingLights BRN (+) (+) IN HARNESS BY FIREWALL OR DRIV KICK
BrakeLights LT.GRN (+) AT BRAKE SWITCH
ReverseLights BLK/PNK (+) (+) 84 PIN CONN BEHIND DRIVERS DASH
Horn YEL/LT.GRN(-) OR BLU AT STEERING COLUMN
Doorlocks / Window
PowerUnLock PNK/GRN (-) (-) NEGATIVE TRIGGER W/KEYLESS
PowerLock PNK/YEL (-) (-) DRIVER'S KICK PANEL REVERS POL W/OUT KEY
LeftFrontWindow01 LF:WHT/BLK
RightFrontWindow01 RF:WHT/YEL
LeftRearWindow01 LF:TAN/LT.BLU
RightRearWindow01 RF:TAN/LT.BLU
Doorlocks / Windows
Power UnLock
(REV) ON MODELS WITHOUT KEYLESS
PowerLock
(REV) ON MODELS WITHOUT KEYLESS
Convenience
HeadLights RED/YEL (+) (+) AT LIGHT SWITCH
TrunkRelease N/A
Mobile Audio / Video
Battery YEL + (+) IGNITION SWITCH HARNESS
Accessory01 GRY/YEL + (+) IGNITION SWITCH HARNESS
Ground BLK/LT.GRN (-) RADIO HARNESS
Illumination LT.BLU/RED (+) RADIO HARNESS
PowerAntenna AMP=BLU
FrontLeftSpeakerPos ORG/LT.GRN
FrontLeftSpeakerNeg LT.BLU/WHT
FrontRightSpeakerPos WHT/LT.GRN
FrontRightSpeakerNeg DARK GREEN/ORANGE
RearLeftSpeakerPos GRY/LT.BLU
RearLeftSpeakerNeg TAN/YEL
RearRightSpeakerPos BRN/PNK
RearRightSpeakerNeg ORG/RED
Amp NOT LIKELY
Control Modules
Note:
Wirediagram.com makes no representation or warranty with respect to the above information including its accuracy, completeness, or its freedom from third parties' proprietary rights. Wirediagram.com disclaims all liability or responsibility for errors or omissions therein or any decision made by the recipient in reliance thereon. The installer must verify any circuitry with the proper test equipment prior to installation.
